Fence Regulations in Kewaskum, WI: A Comprehensive Overview

DOWNLOAD KEWASKUM WI FENCE PERMIT APPLICATION FORM

Understanding the Do’s and Don’ts for a Compliant Fence Installation

In Kewaskum, WI, local regulations dictate the construction and maintenance of fences. To help navigate these rules, we’ve outlined the key requirements below:

Electric and Barbed Wire Fences: These types of fences are prohibited in all districts, except the A-1 and C-2 Districts. The only exception is for security fences which may incorporate barbed wire under specific conditions.

Residential Fences: Residential fences are allowed up to the property lines but must adhere to height restrictions. In the side and rear yards, the fence height must not exceed six and a half feet. In the street yard, the maximum height is three feet. The fence must also maintain a minimum distance from the street and alley right-of-way lines, three feet and five feet respectively. In the street yard, only decorative open fences are allowed. Solid fences can be used elsewhere on the property.

Construction and Maintenance: The finished side of the fence should face the neighboring property with structural components facing inwards. All fences should be maintained in a structurally sound and attractive condition. If a solid fence is chosen, there should be no more than a four-inch gap between the bottom of the fence and the ground.

Security Fences: Security fences can be built up to the property lines in all districts (excluding residential ones) with a maximum height of ten feet. Like residential fences, they should be at least three feet away from the street right-of-way line and five feet from any alley right-of-way line. In the street yard, the fence must be an open design. If a security fence uses barbed wire, it must be stretched (not rolled), at least eight feet above grade, and supported by vertical structures leaning inwards away from the property line.

Fences in Floodways: Fences installed in floodways must have a breakaway design to avoid causing obstructions during a flood event.

These are the broad guidelines for fence installations in Kewaskum. For a seamless fence installation experience, it’s advisable to consult with a local fence contractor like Milwaukee Fence Finders, ensuring your fence meets all necessary requirements. Remember, regulations may vary based on property location and zoning, so it’s crucial to check specifics with your local permitting office.

Fence Permits in Kewaskum, WI

The village of Kewaskum has established a professional partnership with Kunkel Engineering to manage and conduct building inspection services.

To successfully file for a Building Permit in Kewaskum, the following information is required:

1. Two sets of comprehensive plans
2. Two copies of plot plans or plats of survey, detailing elevations, setbacks, drainage, and erosion control
3. Two copies of Thermal Performance, also known as heat loss calculations
4. A completed application, which includes the contractor’s certification numbers and a signed Cautionary Statement to Owner

Here are some types of work that necessitate obtaining one or more permits:

1. Construction of new structures, which includes sheds
2. Installation or replacement of fencing, siding, windows, skylights, or roofing
3. Relocation or replacement of fireplaces, chimneys, furnaces, or air conditioning units
4. Remodeling or relocation of walls, plumbing fixtures, windows, or subfloors
5. Construction or replacement of decks or swimming pools
6. Upgrades to electric service equipment or the addition of circuitry

Disclaimer:

The information provided by Fence Finders LLC regarding building permits and regulations is for general informational purposes only. All information on the site is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the site.